Hey Folks!

Recently I've been displaying more and more custom creations (or just somewhat modified) Vs. actual LEGO designed sets. I guess I've just hit a point where i take more pride in something i have personally designed/fixed/added to. As many of you may have seen a few months ago; i made a large Jurassic World display with most of the JW sets (you can view that below), but as we all know - the JW sets other than the Dino's are pretty lame and not very screen accurate.

So it started look a little kiddie on display with my 10179 and Pirate Ships and i took it down. However JP still is one of my favourite franchises and i felt bad not displaying it in some way. So one Saturday i sat down with 5 million chrome tabs open and started brainstorming ideas and looking at parts and other mocs and decided to make a fairly large T-Rex paddock from JP1, three 32x32 tan baseplates to be exact that will span across 2 detolfs like my previous JW display.

Normally when i do these builds/fixes i just post pictures of the finished product, but this time i decided to do a build log at the suggestion of my girlfriend (she helped me make some foliage and wanted it shown off haha). Hopefully some of you will enjoy the pictures and/or the finished model, so lets get started! (lots of pictures below).

For starters here is my crude "blueprint" courtesy of MS paint:

I went with Tan baseplates as most of the road the cars go on is some kind of sand/gravel that resembles tan more than anything else. Also the new green baseplates are way too bright and do not look natural. One problem i know i'll have is the trees available in LEGO form will be fairly tiny and likely be smaller than the fence itself  but what can you do. I'm only going to make 1 Explorer as lime green parts are a pain in the ass to get. I actually have a custom explorer un-built that i received as a gift for Christmas from some company that sells custom kits (will post pics and the company when i get around to it). I'll use those monorail pieces for the car tracks which work perfectly.

Some of the pieces I've received so far:

I'm going to go with black technic axles for the fences. This isn't screen accurate, but it's more doable (most of the fence is grey in the movie) the large foundation will be grey however. The core design of the fence will be based around a design i found on LDD (http://ldd.us.lego.com/en-us/gallery/d1ebd352-7c59-4542-b859-a4efcb6cb429?index=16&searchword=fence).

I don't have enough parts to really start much, but i did build a bunch of foliage/tree setups for his cage along with a couple of the fence lights (not shown, picture is corrupt or something):

I would really like some more palm trees, specifically the crappy 2 piece ones as they are taller, but any kind of complete palm tree is pretty expensive. So i went to my local LEGO store and luckily they had a couple plant pieces and lots of green pieces on the wall. So i stocked up and combined my parts with theirs to create numerous foliage pieces. I may still end up having to get some more palm trees though if it looks wimpy behind the cage.

The final challenge i have is the minifigures. The only figure we have from JP1 is Dr. Wu (who i don't even need for this moc). So i have to custom make them by scouring bricklink/rebrickable for pieces that will match. And ideally flesh tone pieces. I'm only going to go with Tim, Lex, Alan, and Ian to make it easier on myself. Over time i may add more. Also the Explorer will only fit 4 people.

The minty fresh baseplates and some decals:

That's it for now! i have lots of pieces on the way and eagerly await their arrival. Once I've made some progress i will post again. The only thing i know i'm missing and have still yet to order is the goat figure from Mill Village Raid. Rexy has to have some lunch after all! I've actually posted in the trade forum looking for it, but it's fairly specific that i don't think i'll get any takers but i figured i'd try (link to that post below):

Future plans/ideas: A few more characters added, and maybe the JP1 opening scene/Raptor Paddock moc.

Thanks for looking!

1 hour ago, gregpj said:

Very nice!

Have you ever considered adding any texture to the beige baseplate under the jeep/tracks? Like a puddle with a big muddy trex print?

I did/do want to detail the road a bit more in someway, and this does sound pretty cool! But not sure there's enough room to do it right.

I may just greeble it with some 1x1 round studs/plates to give it a more gravel-like look. Going by the source material though; this road is pretty darn plain.

56 minutes ago, Sandwraithx157 said:

I did/do want to detail the road a bit more in someway, and this does sound pretty cool! But not sure there's enough room to do it right.

I may just greeble it with some 1x1 round studs/plates to give it a more gravel-like look. Going by the source material though; this road is pretty darn plain.

And maybe some weeds/grass at the edge of the fence? Haven't seen the movie in a bazillion years, but unlikely someone went by that edge everyday with a weedwhacker

6 minutes ago, Phil B said:

And maybe some weeds/grass at the edge of the fence? Haven't seen the movie in a bazillion years, but unlikely someone went by that edge everyday with a weedwhacker

Heh, with the whole "spare no expense" philosophy; i wouldn't be surprised if they did hire weed-wackers to do just that! 

Looks excellent, great display piece!

I wish Lego would have made something like this, it displays much better than their recent efforts in the JW range.

Well done man.

This is outstanding. Thanks for sharing.

13 hours ago, Sandwraithx157 said:

Annnddd all done!

Nice work man, I like it a lot.

@Sandwraithx157:

Why did you use the poor goat in your MOC? I'm not very positive it's safe there.

And you surely know how ridiculously expensive goats are compared to other animals.

7 minutes ago, Brian Briggs said:

@Sandwraithx157:

Why did you use the poor goat in your MOC? I'm not very positive it's safe there.

And you surely know how ridiculously expensive goats are compared to other animals.

I just had to go with the accurate animal! Couple friends/family saw my progress and the first thing they would ask is: "Are you going to included a goat!?" lol.

Plus the LEGO goat matches the on-screen goat so well 

4 minutes ago, Sandwraithx157 said:

I just had to go with the accurate animal! Couple friends/family saw my progress and the first thing they would ask is: "Are you going to included a goat!?" lol.

Plus the LEGO goat matches the on-screen goat so well 

I'd prefer a Friends minidoll in its place but I totally comprehend your reasoning.

Hi Sandwraith! I tried to message you, but I guess I'm too new and am not allowed to send messages. I absolutely love your build! Amazingly well done.

I'd like to make a paddock fence myself, and am not sure where to start. I saw you linked a Lego Digital Designer file in the beginning. Unfortunately I wasn't able to open it. You don't have the file in Studio by any chance, do you? (Apologies if the terms are wrong, I learned about Lego Digital Designer and Studio just so I could ask you this question.) Any insights would be GREATLY appreciated! Thanks again for posting the pics and descriptions - really incredible job!