Jump to content
  • LEGO REVIEW: Star Wars Obi-Wan's Jedi Interceptor #75135


    I have to admit that I am a fan of this ship. When I came back into LEGO collecting as an adult, I wanted Obi-Wan's Jedi Starfighter. I loved Star Wars, and I loved this ship. Sadly, it turned out that it was only available in the exclusive 7283 Ultimate Space Battle. I spent a lot of money bricklinking that set, only to be disappointed in how flimsy the build was. Eventually I got rid of the whole thing. I liked 9494 Anakin's Jedi Interceptor and 75038 Jedi Interceptor, but wondered if LEGO would ever revisit Obi-Wan's ship. As soon as this set was announced, my hands twitched to get one to build and review.

    Set #: 75135
    Name: Obi-Wan's Jedi Interceptor
    Theme: Star Wars
    Parts: 215
    Price: $24.99

    Before we get to the build, let’s talk value. At 24.99 the price per piece works out to almost $.12 each. This is on the high/middle side of pricing for a licensed set. There are 2 minifigures. The minifigures are Episode 3 Pilot Obi-Wan Kenobi and R4-P17. Both figures are unique to this set.


    Some people may wind up picking up a set that is open box or, want to verify the box contents before beginning a build. For this set, there are 3 numbered baggies, a sticker sheet, and an instruction book.




    BAG 1: I've built 9494 and 75038. In fact I built and modified 75038 several times. I expected that I knew what to expect from this build. Right from the start it is  different.


    I was pretty happy with this build. I had expected one or two inverted slope pieces, but you build it out of a variety of pieces. It's more interesting than the previous versions.


    I like that you're not using the same wheel pieces as usual for the thrusters. Although it doesn't look as much like a thruster port.


    I think that in all previous builds, the cockpit canopy was almost dead last on the build. It makes so much more sense to finish it up now instead of coming back to it.


    Obi-Wan wants you to have a nice day.


    BAG 2: Here you build the first wing. I noticed right off that instead of leaving a hole in the wing right next to the attachment points for the wing tips, it's just recessed.DSC_0106.JPG.28f81787ba78af88a3130931619DSC_0107.JPG.006ce5417cd9039b31e6297be27

    Notice the large void where the Astromech docking slot is.


    Check out the stickers. If you look at the comparison pictures at the end, you can decide if you like the sticker half hexagon, or the brick built shape on 75038. I like the details on the stickers, I just worry about them coming up later on.


    The blaster kind of disappointed me. It seems squat, and I dislike the gap between the cone and the rest that shows off the red pin.


    Here. you are building the "seat" for the droid.


    I was dissatisfied with how high she (yes, the droid is canonically a she) sticks up out of the port, so I tried removing some pieces. She still sticks up too high, and was impossible to remove. Although, funnily enough, her head came off and left the rest behind when I tried. (Just like in the movie.)


    The round bottomed plate seems perfect as a foot for resting on a flat surface.


    Another sticker showing off all of Obi-Wan's kills. I kind of like the difference in the slope


    I love the new outer wing stickers. I wish it could have been printed, but whatever.


    BAG 3: THis bag is pretty much the same as the last one, in mirror, without an Astromech. I'm going to skim this one a bit.


    Interesting that there's a big Astromech sized hole in here, I was pretty sure they were going to fill it in pretty soon.


    Almost the last thing you build here is a pod to attach to the bottom and fill in that hole. This made no sense and felt a little lazy since they were just mirroring the previous wing. It should have had a different design here.


    Hard to tell here, but the vessel does not rest on the wing pods or the base of the cockpit. It's completely on the tips of the wings.



    I loved this set, it was almost entirely satisfying. Some things were done better previously. I was not a fan of the Astromech socket. Poor R4 sticks entirely too far out and looks like a whack-a-mole. The fact that  the ship rests on the wing tips instead of the cockpit base or even the pods on the underside of the wings is a design flaw, IMO. It places stress on the hinges that will more than likely cause them to slip and change the profile from the canted position to flat. I'm probably going to extend the lower part of the cockpit to relieve the weight on mine.

    I like the stickers. I can completely understand why people don't like them. Hell, in many cases I agree. I just like the added detailing that we wouldn't have gotten without them. I compared the 9494, 75038, and 75135. I liked the added detailing on the wings. I liked the kill marks and the hexagonal cutout. The brick built cut out on 75038 seemed awkward to me. I like the blasters better on the 75038. I think that the slopes are kind of a wash. I couldn't tell you which was more accurate, all I know is that I am glad to have them both.

    The Dark Red pieces of this set appeal to me. It goes with all of the other Republic vehicles. It's just more satisfying with the rest than Anakin's jarring yellow one. Too bad it is impossible to display with wings extended unless you build a stand for it.


    Both of these figures are unique. The printing on the R4-P17 is extensively, but subtly different. Obi-Wan has a serious and a worried expression. The head with headset is the only real difference between this one and the one packaged with 75040.



    As I recently blogged about, the future of Star Wars investing is (most likely) changing. We're looking at a future that may be lacking in Prequel era sets. This particular iteration of the Jedi Interceptor has been on the backburner for over a decade. I feel like this set is sure to be a steady gainer. If you can package this with a 75038 Jedi Interceptor or even better add a couple 75041 Vulture Droids, you'll have a winner.

    The low buy in of this set will keep away most of the prestige level buyers that eschew anything that's not an exclusive. The relatively low level of speculator interest in the cheap sets will keep away the riff raff. Look for a price drop online in a few months as Amazon and Wal-mart try to offset buyer fatigue. Initial values will likely be low as people anticipate PT stuff to continue to be dogs. A spate of post retirement clearances will have the horde fighting each other for the bottom on this set, but stick it out. This set will have legs. Stick it in a hole and bring it out again in a couple years.  

    I know that some of this probably sounds like the overly enthusiastic ravings of a fan, so let me sum up my thoughts. It's a hero ship that pairs nicely with existing retired items. It's unlikely to be remade anytime soon (after all it's been 11 years since the last time.)  Younger fans who came of age with the Prequels and Clone Wars will be getting better jobs with more disposable income and will be looking to get sets that remind them of their youth. It's likely to get passed over because A.) it's a cheap set and easily available and B.) it's a Prequel Trilogy design so the common thinking is that it's just not as good. That last point may continue to hold some water amongst older collectors, but someone has been buying all the PT sets that have been coming out for a decade and a half.


    I'd like to take a look at some of the rare or unique parts that are in this set. This should help to highlight the pieces that may become more valuable once this set is out of production.


    Trans-Black Windscreen 10X6X3 with Jedi Starfighter pattern with a square cutout was only available in 1 other set 75038 Jedi Interceptor


     Dark Red Flag 5x6 hexagonal was only available in 2 other sets 7283 Ultimate Space Battle and 75051 Jedi Scout Fighter


     Dark Red Wedge Plate 8X3 (Right and Left) were available in 2 other sets 7283 Ultimate Space Battle and 7259 ARC-170 Starfighter


     Dark Red Plate 1X10 was available in 3 other sets 60069 Swamp Police Station, 75019 AT-TE, and 75052 Mos Eisley Cantina


     Dark Red Wedge, Plate 6X3 Cut Corners was available in 2 other sets 70137 Bat Strike and 75003 A-Wing Starfighter


     Light Bluish Grey Tile 1x1 Round with SW Republic pattern was available in 2 other sets, 75038 Jedi Interceptor and 75076 Republic Gunship Microfighter





    The control areas are all different. 9494 had a joystick, 75038 had a tile with a big sticker and 75135 has nothing notable.


    See how much higher out of the socket R4 is than R2


    Here are the new R4-P17 (left) and the older one from the Kamino Planet set (Right)


    • Like 4

    User Feedback

    Recommended Comments

    Yes, great review!  Please keep them coming.

    I really liked the recent Anakin's Jedi Interceptor even though it's a fairly simple set, but assumed the build for Obi-Wan's would be the same given it is essentially the exact same ship.  I also don't understand their placement of the droid figure as the R2-D2 figure on the other ships sat much lower.  It's screaming out, "please deploy your buzz droids on me." :)



    Link to comment
    Share on other sites

    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...