Jump to content
  • LEGO REVIEW: Star Wars First Order Special Forces TIE Fighter #75101


    thoroakenfelder

    As a countdown to the Force Awakens, I will be writing reviews on Star Wars LEGO sets this week.

    Full disclosure, I missed writing at least one review to meet my own schedule. So I have decided to punish myself and try to make a new review each day until the opening of Star Wars Episode VII. Hopefully they will be enjoyable for you and for me. I would like to finish out The Force Awakens lineup, but I've already built Rey's Speeder twice and parted out another one, so I have no interest in buying another one to open and build. I have little interest in the Kylo Ren's Shuttle because it's ugly, and I may or may not open a Millennium Falcon. So, unless something changes, TFA might not get full representation. Besides, I am super excited to get to the Shuttle Tyderium.

    REVIEW: SET DETAILS
    Set #: 75101
    Name: First Order Special Forces TIE Fighter
    Theme: Star Wars
    Parts: 517
    Price: $69.99

    Before we get to the build, let’s talk value. At $89.99 the price per piece works out to a bit over $.135 each. This seems to be on the high side of pricing for a licensed set. There are 4 minifigures most of which are currently unique to this set. This set is mainly a troop builder with 2 First Order TIE Pilots, 1 First Order Crew and 1 First Order Officer. The First Order Crew is also available in Kylo Ren's Shuttle.

    DSC_0087.JPG.4093fe654c03af5d4cdb1429ea6

    BOX CONTENTS

    Some people may wind up picking up a set that is open box or, want to verify the box contents before beginning a build. For this set, there are 4 numbered baggies, and a bag containing a sticker sheet, and an instruction book. There are 6 small stickers, but for some reason I only used 4 and cannot figure out where the 2 remaining ones go. I read the instructions 4 times.

    DSC_0066.thumb.JPG.7df5691ccfe474b303538

     

    THE BUILD AND EXECUTION

    Bag 1 creates the basic shape of the hull of the TIE Fighter. There's a back to back crew area for 2 minifigures, which just happen to be in this bag. You've got 2 pilots, which is one more than you usually get with a TIE Fighter. The Control stick is built from a Battle Droid torso. I like that, it makes it seem more thought out than the really old school 1x2 decorated tile like we used to see. You can just see the ports of the spring loaded missile launchers. 

    DSC_0077.JPG.cc67c76cfd4aefdf810b54fad81DSC_0076.JPG.87f65fb5b38d871cfabf0bbb540DSC_0074.JPG.5d44b4bee9558e04c7d3e02283a

    Bag 2 completes the body of the TIE Starfighter. It has 3 hatches and I'm not sure if that thing sticking up is a cannon or an antenna. It's probably a cannon because it's attached to a technic pin that would allow it to swing forward. The red bricks and pieces create the stripe that I am going to assume is for the Special forces. It's pretty striking on this all black vehicle. The white at the ends of the "arms" is kind of jarring, and I hoped that it would not be visible in the final build. I do like the looks of this, very properly TIE Fightery. The First Order Crew that pops up in this bag is sort of plain, except his ridiculous looking helmet.

    DSC_0078.JPG.250ea8ec9ddee1c0387633e9071DSC_0079.thumb.JPG.02a980b2b87b8580528f9DSC_0080.JPG.f4441ff7335526f03d0ec9b8d9eDSC_0081.JPG.0b8ea70047ec5a69d47e60330b6

     

    I have to do something different here, because the build instructions require it. Bags 3 and 4 are the same. The instructions show both bags in the requirements, and at the end just have the "X2" notation. You probably guessed it, each bag contains a wing. The only difference between the 2 bags is that one has a minifigure, and the other has the spring missile projectiles. I'm going to let you in on a little secret here. I haven't built many TIE Fighters. Most of them have very flimsy wings. To me that says everything about the TIE fighter, but does not endear them to me. These wings seem pretty stable. It's got some significant layering , which gives me confidence that it's not going to crumble while it's on display. I've read that the wing design is very similar to the UCS TIE Fighter.

    DSC_0082.JPG.8f8a5c408b265dc95b1584f09fdDSC_0084.JPG.5f374b0bbd5750ddfb81344ad7d

    There's this part used in the build of the wings that I don't think I have ever seen before. Bricklink seems to indicate that it's a rare piece. It's only available in a handful of sets

    DSC_0083.JPG.2505a22351836451f1d086586df

    so, once you've built the wings, of course, you put them together with the body.

    DSC_0085.JPG.ec93b93fe69493e0e8bfdda1477DSC_0086.JPG.c9a351e1877a3082b785938457e

    The opening hatch on top is what allows you to put the pilots inside, the front and rear hatchesjust pretty much allow you to see them.

    DSC_0092.JPG.191534a689933488494a2df8dc9

    There were a surprisingly mall number of extra pieces. It's an indication of the limited number of small pieces in this set. You do end up with 2 extra roller skates from the wing greeblies, so our First Order Crew or Officer could use them. I don't recommend them for the TIE Pilots, because there's no room to skate in the cockpit. I also include the brick separator, because I have so many of these now, and they are not a part of the build.

    DSC_0095.JPG.94ba5d838404ea299851cd688b1

    REACTION

    I like the build. It definitely came across beautifully in the finished product. It was not complicated, but on the other hand, it's also not a box like the older TIE Fighters used to be. I liked the way that they decorated the wings. I have a horrible memory of how the 7146 was decorated, and am just as pleased not to go back to it. When all is said and done, this is a nice set, a little pricey on the 3P score. 13.5 cents per piece just makes it too expensive, probably by at least $10 for the set, maybe by as much as $20.

    The minifigures are great, army builders to a man. Not a single named character to make you feel weird about buying multiples for a scene. They each have new headgear, obviously the pilots have the same one. I think that the design for the Officer's hat and the Crew are dumb looking, but that's not LEGO's fault.

    DSC_0090.JPG.adc97f64415b28852eb67092301DSC_0091.JPG.493bc3634695d4ea33fc33aa511

     

    FINAL THOUGHTS

    TIE Fighters are the most common vehicle in the Empire. Strangely, this is the most common set from the Force Awakens line. Along with all of the product shipped to regular stores like Target, Walmart and Toys R Us, Costcos received large pallets of this set. When all of the other TFA sets sold out from LEGO Shop at Home on Black Friday/Cyber Monday this set still remained. I doubt there's less demand for this set. I think that the early discounts at Costco and Black Friday sales at Walmart and Target are going to be the price that drive this set.

    It's going to be hard to look at this set with MSRP so far above average and get excited about it. The regular buyers, mom and dad and Timmy are likely to pick up a copy when necessary. I foresee it having a discount on Amazon for most of its life.

    The 9492 performed pretty well after retirement, even though this set was coming along to replace it. The long term value of this set depends upon the reception of the new film. If people like the film, they'll probably want to accumulate these later on. It's actually about perfect for the size, so I doubt that they will make an updated version. Probably any future version of the First Order TIE Fighter will just be a repackage of this, which would seriously limit its growth potential. If I had to make a guess though, the next Sequel Trilogy movie will have a different TIE Fighter design featured to sell new toys, so we'll probably see a new TIE interceptor, Advanced or something like that. There's probably going to be a few years before the inevitable reissue.

    (in the week leading up to the new film's release, and 10 days before Christmas, it is sold out from Amazon and already over $90 including shipping. Don't underestimate the power of a new movie)

    Buy it on Amazon

    Edited by thoroakenfelder

    • Like 3



    User Feedback

    Recommended Comments

    5 minutes ago, Calli said:

    I'd get this set for a kid to play with but any adult collector should probably get the 75095 UCS tie fighter instead.

    Well, it's a question of scale and preference. If someone prefers minifig scale stuff, the UCS one does not fit in. This one is also a third of the price and fits better for someone with a limited budget.

    Link to comment
    Share on other sites

    I've also built this set and it is very nice.

    One thing though:

    1 hour ago, thoroakenfelder said:

    There are 4 minifigures all of which are currently unique to this set. This set is mainly a troop builder with 2 First Order TIE Pilots, 1 First Order Crew and 1 First Order Officer.

    Not true. The First Order Crew makes its appearance with two minifigures in Kylo Ren's shuttle if I'm not mistaken.

    I have not build the UCS one yet, but even though it is superior in size and technique the smaller version also has got its charm. One thing is the size of it being smaller and the prize being more affordable. I only can agree here! The minifigs fit in nicely.

     

     

    Link to comment
    Share on other sites

    14 minutes ago, Locutus001 said:

    I've also built this set and it is very nice.

    One thing though:

    Not true. The First Order Crew makes its appearance with two minifigures in Kylo Ren's shuttle if I'm not mistaken.

    I have not build the UCS one yet, but even though it is superior in size and technique the smaller version also has got its charm. One thing is the size of it being smaller and the prize being more affordable. I only can agree here! The minifigs fit in nicely.

     

     

    Fixed, thank you.

    Link to comment
    Share on other sites

    Nice review, @thoroakenfelder! I agree with you that the RRP is a bit on the high side and I would definitely not buy it for that price. Especially in The Netherlands where it costs €75 (RRP), compared to Germany where it costs €70 (RRP). I wouldn't buy it for more than ~€50 but if I see it discounted to that price, I would consider buying it. :) 

    Link to comment
    Share on other sites

    :opens a creaky door:

    There seems to be images for a 517 piece version of this, and a 533 piece version.

    Any know what the actual difference is? Is the one with more pieces better/more stable somehow?

     

    Link to comment
    Share on other sites

    11 hours ago, Achilles said:

    :opens a creaky door:

    There seems to be images for a 517 piece version of this, and a 533 piece version.

    Any know what the actual difference is? Is the one with more pieces better/more stable somehow?

     

    If you look at the set inventory in Bricklink (easier to see through BrickStock), there are about 7 pieces (excluding stickers) that have "alternate items". If you add up the original total of those pieces you get 44 parts, but the sum of the alternate items is 60 - so 16 pieces were added, which nicely corresponds to the 533-517 = 16 piece difference on the box.

    image.png.1f66f9f735e7c61328f9692feb90426f.png

    PS: BrickStock is a bit broken nowadays, cannot pull in prices for minifigures and fails to load lots of images. I'm hoping there will be an update sometime soon ....
     

    EDIT: Looks like BrickStore is back from the dead and actively maintained ... since BrickStock was a clone/continuation of BrickStore when it was dead, it's simple to switch.

    Edited by Phil B
    Link to comment
    Share on other sites



    Join the conversation

    You can post now and register later. If you have an account, sign in now to post with your account.
    Note: Your post will require moderator approval before it will be visible.

    Guest
    Add a comment...

    ×   Pasted as rich text.   Paste as plain text instead

      Only 75 emoji are allowed.

    ×   Your link has been automatically embedded.   Display as a link instead

    ×   Your previous content has been restored.   Clear editor

    ×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...